Have a guttering or small roofing job you’d like a quote on?

Tell us a bit about the job and we’ll get back to you asap.

  • This field is for validation purposes and should be left unchanged.

UV Protection Guaranteed
UV Protection
Guaranteed
Lifetime Durability
Lifetime
Durability
Australian Made
Australian
Made
Expert Installation
Expert
Installation

What Is Ampelite Solasafe Polycarbonate Roofing?

Ampelite Solasafe is a 0.8mm thick solid polycarbonate roofing sheet that installs over roof purlins using standard screws and seals — no specialist tools required. It is manufactured in Melbourne and complies with AS/NZS 4256.5:2006 (polycarbonate cladding) and AS 1562.3:2006 (sheet roofing installation). Available in three performance levels and three profiles, Solasafe is approved for BAL-12.5 and BAL-19 bushfire attack level zones and has been tested to AS/NZS 1530.3:1999 with a Zero Ignitability rating.

KEY PRODUCT FACTS
Specification Ampelite Solasafe Detail
Thickness 0.8mm profiled polycarbonate
Impact Resistance 250 times stronger than standard glass
UV Protection Blocks 99.9% of harmful UV radiation (all levels)
Light Transmission Up to 90% (Clear, Level 1)
Performance Levels Level 1 (max light) · Level 2 SolaFrost (balanced) · Level 3 metallic (max heat reduction)
Profiles Corrugated · Greca · 5-Rib
Effective Cover 760mm per sheet
Sheet Lengths 1.8m to 8.1m in 300mm increments
Minimum Roof Pitch 5 degrees (all profiles)
Purlins Required Yes — standard purlin-based installation
Cold-Curve Capable Yes — all profiles can be curved on site without heating
Hail Warranty 10 years (hailstones up to 25mm under high wind conditions)
Discolouration Warranty Lifetime (max 0.8% light transmission loss per year for 15 years, then max 1% per year)
Bushfire Approval BAL-12.5 and BAL-19 — tested to AS/NZS 1530.3:1999 (Zero Ignitability)
Weight Approximately 1.2kg per m²
Australian Standard AS/NZS 4256.5:2006 + AS 1562.3:2006
Manufactured Melbourne, Australia

Suitable applications: patios, pergolas, carports, verandas, pool and spa enclosures, covered walkways, breezeways, greenhouses, and light commercial skylights.

Ampelite Roofing

Ampelite Solasafe Levels — Which Is Right for Your Melbourne Home?

Ampelite Solasafe is available in three performance levels, each engineered for a different balance of light and heat. The right level for your Melbourne home depends on your roof's orientation, how much summer heat you need to manage, and the intended use of the space below.

Level 1 — Maximum Light Level 2 — SolaFrost Level 3 — Metallic Heat Shield

Light transmission: up to 90% (Clear)

Profiles: Corrugated, Greca, 5-Rib

Colours: Clear, Opal, Grey, Light Bronze, Smooth Cream, Dark Tint

Best for: south/east-facing patios, greenhouses, pool enclosures where maximum natural light is the priority

Light transmission: approx 87% (frosted/diffused)

Profiles: Corrugated, Greca, 5-Rib

Reduces glare and softens direct sunlight without darkening the space

Best for: north/west-facing Melbourne patios and entertaining areas — the most popular everyday choice

Light transmission: diffused soft light through metallic particle layer

Profiles: Corrugated and Greca only

Reflects up to 80% of solar heat — maximum summer comfort

Best for: west-facing roofs, outdoor kitchens, any space where summer heat reduction is the top priority

Ampelite Solasafe Colour Options for Melbourne Homes

Ampelite Solasafe is available in up to six colours across the three levels and three profiles, with colour availability varying by level and profile combination:

Clear

Best for Melbourne: South/east-facing patios, greenhouses, pool enclosures — maximum natural light

Opal

Best for Melbourne: Entertaining areas where soft, even light is preferred over direct sun

Grey

Best for Melbourne: North/west-facing patios — reduces glare without significantly darkening the space

Light Bronze

Best for Melbourne: West-facing carports and pergolas with afternoon sun exposure

Smooth Cream

Best for Melbourne: Heritage homes, period properties, timber-frame pergolas (Corrugated and Greca only)

Dark Tint

Best for Melbourne: Outdoor kitchens, west-facing entertaining areas where glare is the primary concern

Level 3 Metallic

Best for Melbourne: Highest heat reduction — best for north/west-facing Melbourne summer sun exposure

Ampelite Solasafe vs Laserlite vs Suntuf — Which Polycarbonate Is Right for Your Melbourne Home?

Melbourne Gutter Replacements installs all three leading polycarbonate roofing systems. Here is how they compare — so you can walk into your free quote knowing what you want.

Feature Ampelite Solasafe Laserlite (Ampelite) Suntuf (Palram)
Thickness 0.8mm profiled 0.8mm–1mm profiled 0.8mm profiled
Impact Resistance 250x stronger than glass 250x stronger than glass 250x stronger than glass
UV Protection 99.9% all levels 99.9% (3000 series) 99.9% all variants
Profiles Corrugated, Greca, 5-Rib Corrugated, Greca, Trimdek, 5-Rib Corrugated, Greca, Trimdek, 5-Rib
Heat Management Level 3 Metallic – 80% solar heat reflection Laserlite 3000 Comfort Cool™ SolarSmart range – near-infrared reflection
Colours Clear, Opal, Grey, Light Bronze, Smooth Cream, Dark Tint Clear, Grey, Bronze, Opal, Cream, Frost, Gunmetal, Platinum Clear, Grey, Bronze, Cream, Opal, White Diffused + SolarSmart range
Minimum Roof Pitch 5° 5° 5°
Effective Cover 760mm per sheet 760mm per sheet 760mm per sheet
Hail Warranty 10 years (up to 25mm) 10 years Limited lifetime
Discolouration Warranty Lifetime Limited lifetime (Gold or Platinum) Up to 25 years proven
BAL Approval BAL-12.5 and BAL-19 BAL-12.5 and BAL-19 (verify by product) Varies – confirm per product
Cold-Curve Capable Yes – all profiles Yes Yes
Manufactured Melbourne, Australia Melbourne, Australia Australia (Palram)
Best For Lifetime discolouration warranty with Level 3 metallic heat reduction. Widest profile range including Trimdek, with Laserlite 3000 for premium heat reduction. Maximum colour range, Colorbond profile matching and proven 25-year longevity.

Why Melbourne Homeowners Choose Us for Ampelite Roofing

250x stronger than glass

20+ Years Ampelite Installation Experience

Melbourne Gutter Replacements has installed Ampelite Solasafe across Melbourne Metro and the Mornington Peninsula for over 20 years. We install all three levels and all three profiles — corrugated, Greca, and 5-Rib — and have completed projects in BAL-12.5 and BAL-19 bushfire zones across Melbourne's outer suburbs.

ez glaze uv protection

Lifetime Workmanship Guarantee

Every Ampelite Solasafe installation by MGR is backed by a lifetime workmanship guarantee — issued in writing at project completion, separate from the Ampelite manufacturer's warranty. This covers the installation itself for the life of the structure.

ez glaze rooding

Licensed Roof Plumbers — VBA Registered

All roofing work in Victoria must be carried out by a VBA-registered licensed roof plumber. Melbourne Gutter Replacements holds current VBA registration. Every installation is completed with a compliance certificate confirming AS 1562.3:2006 compliance and Building Regulations 2018 requirements.

agrbenefit icon

Free Structural Assessment on Every Quote

Before any Ampelite installation, we carry out a free structural assessment covering roof pitch (minimum 5 degrees), purlin spacing, fixing requirements, and BAL zone status if applicable. We do not sub-contract — the same team that quotes your job installs it.

How We Install Ampelite Solasafe Polycarbonate Roofing in Melbourne

1

Free Site Assessment

We assess your existing structure — roof pitch (must be minimum 5 degrees), purlin spacing and condition, access, and BAL zone status for properties in bushfire-prone Melbourne fringe locations. We confirm the recommended Solasafe level and profile for your orientation and use.

2

Level, profile & colour selection

We advise on the best Solasafe level for your roof orientation (Level 1 for south/east-facing, Level 2 for most north/west-facing Melbourne patios, Level 3 for west-facing roofs with maximum heat exposure). We bring physical colour samples to your property and confirm the correct sheet lengths and purlin spacings for your structure.

3

Installation to AS 1562.3:2006

Ampelite Solasafe sheets are fixed to purlins using the manufacturer's specified 14g screws with 26mm seals at every fixing point. Sheets are overlapped at the ridge and side laps to the manufacturer's specification. We do not skip fixings or under-specify seals — every panel is installed to the Australian Standard.

4

Flashing & edge finishing

We install matching foam infill strips at the ridge and eaves, ridge cappings, wall flashings, and gutter connections to ensure the installation is fully weatherproofed at every edge. Foam infill strips at the ridge and eaves also serve to reduce rain noise — particularly relevant for enclosed outdoor rooms.

5

Compliance certificate on completion

On completion we provide a written compliance certificate confirming the installation meets AS 1562.3:2006 and any applicable Building Regulations 2018 requirements. Our lifetime workmanship guarantee is issued at this point in writing.

Ampelite Solasafe Roofing Installations Across Melbourne

Melbourne Gutter Replacements installs Ampelite Solasafe polycarbonate roofing across all of Melbourne Metro and the Mornington Peninsula — including:

Inner & Middle Melbourne

  • Brighton · Bayside · Sandringham · Mentone
  • Camberwell · Hawthorn · Kew · Malvern
  • Glen Waverley · Doncaster · Box Hill · Surrey Hills
  • Toorak · South Yarra · St Kilda · Port Melbourne
  • Essendon · Pascoe Vale · Moonee Ponds
  • Oakleigh · Clayton · Moorabbin · Highett

Outer Melbourne & Mornington Peninsula

  • Frankston · Mount Eliza · Mount Martha · Mornington
  • Rosebud · Rye · Sorrento · Portsea
  • Berwick · Cranbourne · Pakenham · Narre Warren
  • Ringwood · Knox · Ferntree Gully · Belgrave
  • Dandenong · Springvale · Noble Park · Lynbrook
  • Lilydale · Bayswater · Knoxfield · Rowville

Have a guttering or small roofing job you’d like a quote on?

Tell us a bit about the job and we’ll get back to you asap.

  • This field is for validation purposes and should be left unchanged.

Tried, tested & backed by warranties

All of our products and materials come with full manufacturers warranties and at Melbourne Gutter Group, we also provide a lifetime guarantee on all of our work giving you peace of mind that your gutters have been installed by professionals with leading quality products.

Lifetime GuaranteeWarrantyWarranty

Areas We Serve

Melbourne Gutter Replacements installs Ampelite roofing right across Melbourne Metro and the Mornington Peninsula – including these suburbs and surrounds.

A
  • Ashburton
  • Aspendale Gardens
B
  • Balwyn
  • Bayswater
  • Belgrave
  • Belgrave Heights
  • Box Hill
  • Braeside
  • Brighton East
C
  • Camberwell
  • Carrum
  • Clayton
  • Cranbourne
D
  • Dandenong
  • Dandenong South
  • Docklands
  • Doncaster East
E
  • Elwood
F
  • Ferntree Gully
  • Frankston
G
  • Glen Iris
  • Glen Waverley
H
  • Hampton Park
  • Hawthorn
  • Hawthorn East
  • Highett
  • Huntingdale
K
  • Knoxfield
L
  • Lilydale
  • Lynbrook
  • Lyndhurst
M
  • Malvern East
  • Melbourne (St Kilda Road precinct)
  • Mentone
  • Mont Albert
  • Moorabbin
  • Mount Waverley
  • Mulgrave
N
  • Narre Warren
  • Noble Park
  • Notting Hill
O
  • Oakleigh
  • Oakleigh East
  • Oakleigh South
P
  • Patterson Lakes
  • Port Melbourne
  • Oakleigh South
S
  • Sandown
  • Springvale
  • Springvale South
  • St Kilda
  • Surrey Hills
T
  • Tyabb
Ez glaze

ez glaze polycarbonate

ez glaze roofing

ez glaze roofing

ez roofinmg

ez glaze melbourne

ez glaze roofing-

Frequently Asked Questions

  • What is Ampelite Solasafe polycarbonate roofing?

    Ampelite Solasafe is a 0.8mm thick UV-stabilised polycarbonate roofing sheet, 250 times stronger than glass, blocking 99.9% of UV radiation with up to 90% light transmission. Available in 3 levels and 3 profiles, it complies with AS/NZS 4256.5:2006 and AS 1562.3:2006, is approved for BAL-12.5 and BAL-19 bushfire zones, and is manufactured in Melbourne. Ideal for patios, pergolas, carports, verandas, and pool enclosures. Melbourne Gutter Replacements installs all levels and profiles across Melbourne Metro and the Mornington Peninsula.

  • What is the difference between Ampelite Solasafe Level 1, Level 2, and Level 3?

    Level 1 offers up to 90% light transmission across all three profiles — best for south/east-facing patios needing maximum natural light. Level 2 (SolaFrost) allows approximately 87% of light while reducing glare and heat — the most popular choice for north/west-facing Melbourne entertaining areas. Level 3 uses metallic particles reflecting up to 80% of solar heat — Corrugated and Greca only, best for west-facing roofs where summer heat is the priority.

  • What colours does Ampelite Solasafe polycarbonate come in?

    Ampelite Solasafe comes in six colours: Clear (90% transmission), Opal (soft diffused), Grey (moderate heat/glare reduction), Light Bronze (warm tint), Smooth Cream (Corrugated and Greca only), and Dark Tint (maximum glare control). Level 3 adds a metallic heat-reflective finish. For north/west-facing Melbourne patios, Grey, Light Bronze, or Level 3 metallic are recommended. We bring physical colour samples to every free site consultation.

  • What profiles does Ampelite Solasafe polycarbonate come in ?

    Three profiles are available: Corrugated (all three levels — matches standard corrugated steel), Greca (all three levels — square-ribbed, popular for modern homes), and 5-Rib (Level 1 and Level 2 only — enhanced strength and drainage). All profiles have a 5-degree minimum pitch, 760mm effective cover per sheet, and are cold-curve capable for curved pergola and barrel roof designs.

  • What is the minimum roof pitch for Ampelite Solasafe polycarbonate roofing?

    The minimum roof pitch for Ampelite Solasafe across all three profiles is 5 degrees. Effective cover per sheet is 760mm. Melbourne Gutter Replacements confirms pitch and purlin spacing comply with AS 1562.3:2006 on every project before installation begins.

  • How long does Ampelite polycarbonate roofing last and what warranty does it carry?

    Ampelite Solasafe carries two warranties: a lifetime discolouration warranty (max 0.8% light transmission loss per year for 15 years, then max 1% per year), and a 10-year hail damage warranty covering hailstones up to 25mm. Correctly installed Solasafe performs for 20–30+ years in Melbourne’s climate. Melbourne Gutter Replacements adds a lifetime workmanship guarantee on every installation.

  • How does Ampelite Solasafe compare to Laserlite polycarbonate roofing?

    Both block 99.9% UV and are 250 times stronger than glass. Solasafe has a 3-level system (Level 3 metallic reflects 80% solar heat) and a lifetime discolouration warranty. Laserlite offers a wider range of profiles, including Trimdek and the Laserlite 3000 Comfort Cool series. Both carry a 10-year hail warranty and 5-degree minimum pitch. Melbourne Gutter Replacements installs both — call 0421 558 134 for a recommendation.

  • Is Ampelite polycarbonate roofing noisy when it rains in Melbourne?

    Ampelite Solasafe produces rain noise similar to corrugated Colorbond — acceptable for most patios and pergolas. Noise can be reduced by fitting foam infill strips at the ridge and eaves, installing acoustic sarking beneath the sheets, or selecting the 5-Rib profile. For significantly quieter results, Ampelite’s twin-wall polycarbonate system provides superior acoustic insulation.

  • What can Ampelite Solasafe polycarbonate roofing be used for?

    Ampelite Solasafe suits patios, pergolas, carports, verandas, pool and spa enclosures, covered walkways, breezeways, and greenhouses. Level 1 Clear is recommended for south-facing gardens and pool enclosures; Level 2 for most north/west-facing Melbourne entertaining areas; Level 3 for west-facing roofs needing maximum heat reduction. Its BAL-12.5 and BAL-19 approval also makes it suitable for properties in Melbourne’s bushfire-prone outer suburbs.

  • Does Ampelite polycarbonate meet Australian bushfire standards?

    Yes. Ampelite Solasafe is approved for BAL-12.5 and BAL-19 zones when used separately from the main building and tested to AS/NZS 1530.3:1999, with a Zero Ignitability rating. Relevant for Melbourne properties in the Dandenong Ranges, Yarra Valley fringe, and Mornington Peninsula hinterland. BAL-40 and BAL-FZ zones require different materials. We check BAL ratings as part of every site assessment in bushfire-prone areas.