Have a guttering or small roofing job you’d like a quote on?
Tell us a bit about the job and we’ll get back to you asap.
What Is EZ Glaze Polycarbonate Roofing?
EZ Glaze is a 3mm thick solid polycarbonate roofing panel that installs directly over roof rafters without the need for purlins or glazing bars. Made by Palram (the Suntuf brand in Australia), it uses a proprietary profiled-edge design, each sheet’s corrugated side overlaps the next, creating a watertight, glass-like roofing surface with minimal hardware and structural load.
KEY PRODUCT FACTS
| Specification | EZ Glaze Detail |
|---|---|
| Manufacturer | Palram / Suntuf (Australia) |
| Material | 3mm solid polycarbonate |
| Impact Resistance | 250× stronger than standard glass |
| UV Protection | Blocks 99.9% of harmful UV radiation |
| Light Transmission | Up to 90% natural light (Clear variant) |
| Available Colours | Clear, Grey, Bluish Breeze |
| Minimum Roof Pitch | 5 degrees |
| Rafter Spacing | 600mm centres (spans up to 1.69m between rafters) |
| Effective Sheet Cover | 600mm per sheet |
| Purlins Required? | No — installs directly over rafters |
| Warranty | 10-year manufacturer’s limited warranty |
| Australian Standard | AS/NZS 1562.3 plastic roof cladding |

Why Melbourne Homeowners Choose EZ Glaze Polycarbonate Roofing?
250x Stronger Than Glass
EZ Glaze's 3mm solid polycarbonate construction is 250 times more impact-resistant than standard glass, handling Melbourne hail, wind, and storm debris without cracking or shattering.
99.9% UV Protection
All three EZ Glaze colour variants block 99.9% of harmful UV radiation while allowing up to 90% of natural light to pass through, protecting your furniture, flooring, and skin without darkening your outdoor space.
No Purlins Required
EZ Glaze panels are designed to install directly over rafters without purlins or glazing bars. The profiled sheet edge overlaps the next panel to create a clean, watertight roofing surface with fewer visible fixings.
Glass-Like Aesthetic
The flat, smooth, solid-panel profile creates a sleek, modern roofline that looks like glass from below and above, no corrugated ridges, no visible purlins, no glazing bars interrupting the sightline.
10-Year Warranty
EZ Glaze carries a 10-year limited manufacturer's warranty on UV performance, colour stability and structural integrity. Melbourne Gutter Replacements adds a lifetime workmanship guarantee on all installations.
Low Maintenance
EZ Glaze's smooth polycarbonate surface resists moss, lichen, and grime build-up. A periodic rinse with water and a soft cloth is all that's needed to keep panels clear and performing well year after year.
EZ Glaze vs Laserlite vs Ampelite: Which Polycarbonate Roofing Is
Right for Your Melbourne Home?
Melbourne Gutter Replacements installs all three leading polycarbonate roofing
systems — EZ Glaze (Palram/Suntuf), Laserlite (Ampelite), and Ampelite Solasafe.
Here is how they compare so you can make an informed decision:
| Feature | EZ Glaze (Palram/Suntuf) | Laserlite 2000/3000 | Ampelite Solasafe |
|---|---|---|---|
| Profile type | Flat solid panel (glass-like) | Corrugated/ribbed sheet | Corrugated sheet |
| Thickness | 3mm solid polycarbonate | 0.8mm–1mm polycarbonate | 0.8mm polycarbonate |
| Impact resistance | 250× stronger than glass | 250× stronger than glass | Hail-resistant (unspecified) |
| UV protection | 99.9% all colours | 99.9% (3000 series) | 99.9% |
| Purlins needed? | No — rafter direct | Yes (intermittent) | Yes (intermittent) |
| Min. roof pitch | 5 degrees | 5 degrees | 5 degrees |
| Aesthetic | Seamless, glass-like | Corrugated / ribbed | Corrugated / ribbed |
| Colours available | Clear, Grey, Bluish Breeze | Clear, Grey, Bronze, Opal, Cream | Clear, Grey, Bronze, Opal, Cream |
| Warranty | 10-year manufacturer | 10-year manufacturer | 10-year manufacturer |
| Best for | Modern pergolas, patios, and pool enclosures where aesthetics matter |
Matching existing corrugated roofs; versatile roof structures | Budget-conscious projects; matching Colorbond corrugated roofs |
Professional EZ Glaze Polycarbonate Roofing Installation Across Melbourne
Every EZ Glaze installation by Melbourne Gutter Replacements follows a structured process to ensure structural compliance, weatherproofing integrity, and a finished result that meets the manufacturer's warranty requirements.
Free Site Assessment
We assess your existing structure rafter spacing (must be at or within 600mm centres), roof pitch (minimum 5 degrees), and whether any framework modifications are needed before installation. We also confirm council/building permit requirements for your Melbourne property and zone.
Colour & Size Consultation
We advise on the best EZ Glaze colour for your roof orientation (north-, south-, east-, or west-facing), the required sheet lengths (available in standard sizes up to 6m), and any custom-cut requirements for your project.
Installation
EZ Glaze panels are screw-fixed directly to rafters at 600mm centres using the manufacturer's specified fasteners and washers. Each sheet is overlapped at its profiled edge to create a watertight seal. We do not cut corners on fixings — every panel is installed in accordance with the Australian Standard.
Flashing & Edge Finishing
We install matching aluminium wall flashings, ridge cappings, and gutter connections to ensure your EZ Glaze roof is fully waterproofed at every edge, which is particularly critical in Melbourne's high-rainfall and hail season.
Final Inspection & Compliance Certificate
Upon completion, we conduct a full installation inspection and provide a compliance certificate confirming that the installation meets AS/NZS 1562.3 and any applicable requirements of the Building Regulations 2018.
How Much Does EZ Glaze Roofing Cost in Melbourne?
Professionally installed EZ Glaze polycarbonate roofing in Melbourne costs depend on area size, roof complexity, framework condition, and access. This pricing aligns with standard polycarbonate roofing installation ranges across Australia, where costs vary based on supply requirements, labour conditions, and installation complexity.
EZ Glaze Sheet Material
Priced per linear metre based on sheet coverage
Labour (Installation)
Varies by project size & complexity
Fully Installed (est.)
Priced per square metre for complete supply and installation
Have a guttering or small roofing job you’d like a quote on?
Tell us a bit about the job and we’ll get back to you asap.
Tried, tested & backed by warranties
All of our products and materials come with full manufacturers warranties and at Melbourne Gutter Group, we also provide a lifetime guarantee on all of our work giving you peace of mind that your gutters have been installed by professionals with leading quality products.



Areas We Serve
Melbourne Gutter Replacements installs EZ Glaze polycarbonate roofing right across Melbourne Metro and the Mornington Peninsula – including these suburbs and surrounds.
- Ashburton
- Aspendale Gardens
- Balwyn
- Bayswater
- Belgrave
- Belgrave Heights
- Box Hill
- Braeside
- Brighton East
- Camberwell
- Carrum
- Clayton
- Cranbourne
- Dandenong
- Dandenong South
- Docklands
- Doncaster East
- Elwood
- Ferntree Gully
- Frankston
- Glen Iris
- Glen Waverley
- Hampton Park
- Hawthorn
- Hawthorn East
- Highett
- Huntingdale
- Knoxfield
- Lilydale
- Lynbrook
- Lyndhurst
- Malvern East
- Melbourne (St Kilda Road precinct)
- Mentone
- Mont Albert
- Moorabbin
- Mount Waverley
- Mulgrave
- Narre Warren
- Noble Park
- Notting Hill
- Oakleigh
- Oakleigh East
- Oakleigh South
- Patterson Lakes
- Port Melbourne
- Oakleigh South
- Sandown
- Springvale
- Springvale South
- St Kilda
- Surrey Hills
- Tyabb
Frequently Asked Questions
-
What is EZ Glaze polycarbonate roofing?
EZ Glaze is a 3mm thick solid polycarbonate roofing panel manufactured by Palram (sold in Australia under the Suntuf brand) that delivers a sleek, glass-like appearance without the weight, cost, or engineering complexity of real glass. EZ Glaze features a proprietary profiled edge design that allows each panel to slip directly over rafters and overlap the next sheet, eliminating the need for glazing bars, purlins, or complex joining systems. It is 250 times more impact-resistant than standard glass, blocks 99.9% of harmful UV radiation, and allows up to 90% natural light transmission. Common applications in Melbourne include patio roofing, pergolas, carports, verandas, and outdoor entertaining areas.
-
What colours does EZ Glaze polycarbonate come in?
EZ Glaze polycarbonate is available in three colours: Clear, Grey, and Bluish Breeze. Clear offers the highest light transmission, up to 90%, making it ideal for south- or east-facing patios where summer heat is not the primary concern. Grey significantly reduces solar heat transmission, making it the better choice for north- or west-facing Melbourne patios in summer. Bluish Breeze provides a contemporary, tinted appearance with moderate heat reduction and is popular for pergolas and pool enclosures. All three colour variants block 99.9% of UV radiation and carry a 10-year manufacturer’s warranty.
-
How much does EZ Glaze roofing cost to install in Melbourne?
Professional installation of EZ Glaze polycarbonate roofing in Melbourne depends on the area size, roof complexity, access, and any additional framework or fascia work required. As EZ Glaze installs directly over rafters without purlins, labour time is reduced compared to many other polycarbonate systems, thereby lowering your overall installation cost. Contact Melbourne Gutter Replacements on 0421 558 134 for a free, no-obligation quote.
-
What is the minimum roof pitch for EZ Glaze roofing?
The minimum roof pitch required for EZ Glaze polycarbonate is 5 degrees. At this pitch, the overlapping sheet design and proprietary edge profile create a watertight seal that prevents water pooling and ingress. Rafters should be spaced at 600mm centres, and EZ Glaze can span up to 1.69 metres between rafters without additional support structures. Melbourne Gutter Replacements conducts a structural assessment as part of every EZ Glaze quote to confirm compliance with Australian Standard AS/NZS 1562.3 for pitch and rafter spacing.
-
What is the difference between EZ Glaze and Laserlite polycarbonate roofing?
EZ Glaze (by Palram/Suntuf) is a 3mm-thick flat, solid-sheet system that installs directly over rafters for a seamless, glass-like finish, best for modern pergolas, patios, and entertaining areas where aesthetics are the priority. Laserlite (by Ampelite) is a corrugated sheet system suited to a wider range of roof structures and profiles, with strong UV performance and hail warranties — better suited where you need to match an existing corrugated roof or require more installation flexibility. Both carry a 10-year warranty and 99.9% UV protection. Melbourne Gutter Replacements installs both; we can advise which is right for your specific project.
-
Does EZ Glaze polycarbonate roofing require purlins?
No. One of EZ Glaze’s key advantages is that it does not require purlins between rafters. Its proprietary profiled edge design allows sheets to be installed directly onto rafters spaced at 600mm centres, with adjacent sheets overlapping at the profiled edge to create a weatherproof seal. This rafter-only installation reduces both material costs (no purlins to purchase or install) and labour time compared with corrugated polycarbonate systems, which require intermittent purlins for structural support.
-
How long does EZ Glaze roofing last?
EZ Glaze polycarbonate roofing comes with a 10-year limited manufacturer’s warranty covering UV performance, colour stability, and structural integrity under normal Australian conditions. In practice, quality polycarbonate roofing, installed correctly and maintained regularly, can last 15–20 years or more in Melbourne’s climate. EZ Glaze’s smooth surface resists moss and grime buildup, and periodic rinsing with water and a soft cloth is typically all that’s needed to maintain clarity and performance. Melbourne Gutter Replacements also provides a lifetime workmanship guarantee on all installations.



