Have a guttering or small roofing job you’d like a quote on?
Tell us a bit about the job and we’ll get back to you asap.
UV Protection Guaranteed
Lifetime Durability
Australian Made
Expert InstallationWhat Is Laserlite Polycarbonate Roofing?
Laserlite is a profiled polycarbonate roofing system available in two product series — Laserlite 2000 and Laserlite 3000 — both featuring Advanced Weatherguard technology and a Lifetime Platinum Warranty on light transmission. Laserlite 3000 additionally includes Comfort Cool technology for active heat reduction. Both products comply with Australian Standard AS 4256.5-2006 and are rated for use in high wind load areas.
KEY PRODUCT FACTS
| Specification | Laserlite 2000 | Laserlite 3000 |
|---|---|---|
| Technology | Advanced Weatherguard | Advanced Weatherguard + Comfort Cool |
| Heat Reduction | Standard UV protection | Up to 50% better than standard polycarbonate |
| UV Protection | 99.9% on all colours | 99.9% on all colours |
| Profiles | Corrugated · Greca · Trimdeck/5-Rib | Corrugated · Greca only (no Trimdeck) |
| Colours | Clear · Opal · Cream · Bronze Tint · Grey Tint (5 colours) | Frost · Platinum · Gun Metal (3 heat-reduction colours) |
| Sheet Cover Width | 755mm (Corrugated) · 760mm (Greca) · 762mm (Trimdeck) | 760mm (Corrugated and Greca) |
| Available Lengths | 1.8m to 9.0m | Up to 9.0m |
| Minimum Roof Pitch | 5 degrees (88mm per metre) | 5 degrees (88mm per metre) |
| Hail Warranty | 10 years (hailstones up to 25mm) | 10 years (hailstones up to 25mm) |
| Light Transmission Warranty | Lifetime Platinum — maximum 11% light transmission loss in the first 15 years | Lifetime Platinum — maximum 11% light transmission loss in the first 15 years |
| Australian Standard | AS 4256.5:2006 | AS 4256.5:2006 |
| High Wind Zone Rated | Yes | Yes |
| Manufactured | Australia | Australia |
| Best For | Maximum colour and profile choice; matching existing Trimdeck roofs | North- and west-facing Melbourne patios requiring maximum summer heat reduction |
Laserlite 2000 vs Laserlite 3000 — Melbourne Installer's Guide
The right Laserlite product for your Melbourne patio depends on one key question: is summer heat your primary concern? Here is how to choose:
| Choose Laserlite 2000 if... | Choose Laserlite 3000 if... |
|---|---|
|
|
Laserlite Colour Options for Melbourne Homes
Laserlite 2000 and Laserlite 3000 have separate colour ranges designed for different purposes. Here is the complete colour guide with light transmission data and Melbourne orientation recommendations:
Laserlite 2000 — Five Colours
Best for Melbourne: South/east-facing patios, pool enclosures, greenhouses — maximum natural light
Best for Melbourne: Entertaining areas where soft, even diffused light is preferred over direct sun
Best for Melbourne: Heritage homes, Federation-style properties, timber-frame pergolas
Best for Melbourne: West-facing carports and pergolas with afternoon sun exposure
Best for Melbourne: North/west-facing patios — greatest heat and glare reduction within the 2000 range
Laserlite 3000 — Three Heat-Reduction Colours (Comfort Cool)
Heat/light characteristics Diffused light with Comfort Cool heat reduction — the most popular Laserlite 3000 colour
Heat/light characteristics High heat reduction with a reflective finish — premium appearance
Heat/light characteristics Partial light with maximum heat reduction — darkest Laserlite 3000 option
Laserlite Profile Options — Corrugated, Greca and Trimdeck
Laserlite 2000 is available in three profiles. Laserlite 3000 is available in two profiles only — there is no Trimdeck option in the 3000 range. This is an important selection consideration for Melbourne homeowners needing to match an existing corrugated steel roof.
| Profile | Available In | Description & Use Case |
|---|---|---|
| Corrugated | Laserlite 2000 & Laserlite 3000 | Classic rounded wave profile that matches standard Corrugated Colorbond and Zincalume steel roofing. It is the most common residential roofing profile, with an effective cover width of 755mm for Laserlite 2000 and 760mm for Laserlite 3000. |
| Greca | Laserlite 2000 & Laserlite 3000 | Square-ribbed profile designed to match the Greca steel sheet profile. A popular choice for modern and contemporary Melbourne homes, offering an effective cover width of 760mm. |
| Trimdeck / 5-Rib | Laserlite 2000 Only | Ribbed profile with wider coverage and excellent water drainage. Designed to match Colorbond Trimdek steel roofing, making it the only Laserlite profile suitable for Trimdek roof replacements. It has an effective cover width of 762mm and is available exclusively in Laserlite 2000. |
Laserlite vs Ampelite Solasafe vs Suntuf — Which Polycarbonate Is Right for Melbourne?
Melbourne Gutter Group installs all three leading polycarbonate roofing systems. Here is how they compare so you can make an informed decision before your free site assessment.
| Feature | Laserlite (2000 & 3000) | Ampelite Solasafe | Suntuf (Palram) |
|---|---|---|---|
| UV Protection | 99.9% on all colours | 99.9% on all performance levels | 99.9% on all variants |
| Heat Reduction Technology | Laserlite 3000 Comfort Cool – up to 50% better heat reduction | Level 3 metallic particles – up to 80% solar heat reflection | SolarSmart range with near-infrared reflection |
| Profiles | Corrugated, Greca, Trimdeck/5-Rib (2000) · Corrugated, Greca (3000) | Corrugated, Greca, 5-Rib | Corrugated, Greca, Trimdeck, 5-Rib |
| Colours | 5 colours (2000) + 3 heat-reduction colours (3000) | 6 colours + Level 3 Metallic | 6+ colours + SolarSmart range |
| Minimum Roof Pitch | 5 degrees | 5 degrees | 5 degrees |
| Hail Warranty | 10 years (hailstones up to 25mm) | 10 years (hailstones up to 25mm) | Limited lifetime |
| Light Transmission Warranty | Lifetime Platinum (maximum 11% light transmission loss in the first 15 years) | Lifetime discolouration warranty | Up to 25 years proven performance |
| Trimdeck / 5-Rib Option | Yes – Laserlite 2000 Trimdeck only | Yes – Level 1 and Level 2 only | Yes |
| Manufactured | Australia | Melbourne, Australia | Australia (Palram) |
| Best For | Widest profile range including Trimdeck (2000) plus best-in-class Comfort Cool heat reduction technology (3000) | Three-level performance system with lifetime discolouration warranty and Level 3 metallic heat reduction | Maximum colour range, proven 25-year track record and excellent Colorbond profile matching |
Why Melbourne Homeowners Choose Us for Laserlite Roofing
20+ Years Laserlite Installation
Melbourne Gutter Group has installed both Laserlite 2000 and Laserlite 3000 across Melbourne Metro and the Mornington Peninsula for over 20 years. We install all profiles — Corrugated, Greca, and Trimdeck — and have completed Laserlite installations in standard and high wind load zones across Melbourne.
Lifetime Workmanship Guarantee
Every Laserlite installation by Melbourne Gutter Group is backed by a lifetime workmanship guarantee — issued in writing on completion, separate from and in addition to the Laserlite Lifetime Platinum Warranty on the product itself.
VBA-Registered Licensed Roof Plumbers
All roofing work in Victoria is legally required to be carried out by a VBA-registered licensed roof plumber. Melbourne Gutter Group holds current VBA registration. Every installation is completed with a compliance certificate confirming AS 4256.5-2006 compliance.
Free Structural Assessment on Every Quote
We carry out a free structural assessment on every project covering roof pitch (5-degree minimum), purlin condition and spacing, fixing requirements for your wind load zone, and profile/colour recommendation based on your Melbourne patio's specific orientation and use. We do not subcontract.
How We Install Laserlite Polycarbonate Roofing in Melbourne
Free site assessment
We assess your roof pitch (minimum 5 degrees / 88mm fall per metre), purlin condition and spacing, wind load zone, and roof orientation. We confirm whether Laserlite 2000 or 3000 suits your north/west vs south/east facing orientation, and which profile (Corrugated, Greca, or Trimdeck) matches your existing structure. If you need to match an existing Colorbond Trimdek steel roof, we confirm this at this stage.
Product, colour & profile selection
We advise on Laserlite 2000 vs 3000 based on your specific orientation (Laserlite 3000 for north/west-facing — Comfort Cool delivers up to 50% better heat reduction; Laserlite 2000 for south/east-facing or Trimdeck profile matching). We bring physical colour samples and advise on light transmission levels for your preferred colour — including the 93%/Clear through to 19%/Grey Tint range within Laserlite 2000.
Installation to AS 4256.5-2006
Laserlite sheets are fixed to purlins at the manufacturer's specified fixing centres using the correct 12-14g screws with neoprene washers. Sheets are overlapped at the ridge and side laps to the Laserlite installation guide specification. We do not skip fixings or under-specify fasteners — every panel is installed to Australian Standard.
Flashing, infill & edge finishing
We install foam eave and ridge infill strips, ridge cappings, wall flashings, and gutter connections to ensure full weatherproofing at every edge. Foam infill strips at the ridge and eaves also reduce rain noise — relevant for enclosed outdoor rooms. All flashings are colour-matched to the sheet selection where possible.
Compliance certificate on completion
On completion we provide a written compliance certificate confirming AS 4256.5-2006 compliance and Building Regulations 2018 requirements. Our lifetime workmanship guarantee is issued at this point in writing.
Laserlite Roofing Installations Across Melbourne
Melbourne Gutter Group installs Laserlite 2000 and Laserlite 3000 polycarbonate roofing across all of Melbourne Metro and the Mornington Peninsula — including:
Inner & Middle Melbourne
- Brighton · Bayside · Sandringham · Mentone
- Camberwell · Hawthorn · Kew · Malvern
- Glen Waverley · Doncaster · Box Hill · Mont Albert
- Toorak · South Yarra · St Kilda · Port Melbourne
- Essendon · Moonee Ponds · Pascoe Vale · Coburg
- Oakleigh · Clayton · Moorabbin · Highett
- Elwood · Glen Iris · Malvern East · Surrey Hills
Outer Melbourne & Peninsula
- Frankston · Mount Eliza · Mount Martha · Mornington
- Rosebud · Rye · Sorrento · Tyabb
- Berwick · Cranbourne · Pakenham · Narre Warren
- Lilydale · Bayswater · Knoxfield · Ferntree Gully
- Dandenong · Springvale · Noble Park · Lynbrook
- Ringwood · Mitcham · Croydon · Nunawading
- Werribee · Hoppers Crossing · Altona · Laverton
Have a guttering or small roofing job you’d like a quote on?
Tell us a bit about the job and we’ll get back to you asap.
Tried, tested & backed by warranties
All of our products and materials come with full manufacturers warranties and at Melbourne Gutter Group, we also provide a lifetime guarantee on all of our work giving you peace of mind that your gutters have been installed by professionals with leading quality products.
Areas We Serve
Melbourne Gutter Group installs Laserlite roofing right across Melbourne Metro and the Mornington Peninsula – including these suburbs and surrounds.
- Ashburton
- Aspendale Gardens
- Balwyn
- Bayswater
- Belgrave
- Belgrave Heights
- Box Hill
- Braeside
- Brighton East
- Camberwell
- Carrum
- Clayton
- Cranbourne
- Dandenong
- Dandenong South
- Docklands
- Doncaster East
- Elwood
- Ferntree Gully
- Frankston
- Glen Iris
- Glen Waverley
- Hampton Park
- Hawthorn
- Hawthorn East
- Highett
- Huntingdale
- Knoxfield
- Lilydale
- Lynbrook
- Lyndhurst
- Malvern East
- Melbourne (St Kilda Road precinct)
- Mentone
- Mont Albert
- Moorabbin
- Mount Waverley
- Mulgrave
- Narre Warren
- Noble Park
- Notting Hill
- Oakleigh
- Oakleigh East
- Oakleigh South
- Patterson Lakes
- Port Melbourne
- Oakleigh South
- Sandown
- Springvale
- Springvale South
- St Kilda
- Surrey Hills
- Tyabb
Frequently Asked Questions
-
What is the difference between Laserlite 2000 and Laserlite 3000 polycarbonate roofing?
Laserlite 2000 offers reliable UV protection, five colours and three profiles, including Trimdeck. Laserlite 3000 adds Comfort Cool technology for up to 50% better heat reduction, with two profiles and three heat-reducing colours—making it better suited to hot, sun-exposed Melbourne patios.
-
What colours does Laserlite polycarbonate roofing come in?
Laserlite 2000 is available in Clear, Opal, Cream, Bronze Tint and Grey Tint, while Laserlite 3000 comes in Frost, Platinum and Gun Metal. For north- or west-facing Melbourne patios, Grey Tint, Frost or Gun Metal are generally the best options for reducing heat and glare.
-
What profiles does Laserlite polycarbonate roofing come in?
Laserlite 2000 is available in Corrugated, Greca and Trimdeck/5-Rib profiles, while Laserlite 3000 comes in Corrugated and Greca only. All profiles require a minimum 5-degree roof pitch and are available in lengths up to 9 metres; for matching a Colorbond Trimdek roof, Laserlite 2000 Trimdeck is the only suitable option.
-
What is the minimum roof pitch for Laserlite polycarbonate roofing?
Laserlite polycarbonate roofing requires a minimum 5-degree pitch, equal to an 88mm fall per metre, to prevent water pooling. Both Laserlite 2000 and 3000 comply with AS 4256.5-2006 and are suitable for high wind load areas.
-
What warranty does Laserlite polycarbonate roofing carry?
Laserlite 2000 and 3000 include a Lifetime Platinum Warranty covering light transmission, plus a 10-year hail warranty for hailstones up to 25mm. Melbourne Gutter Replacements also provides a separate lifetime workmanship guarantee on every installation.
-
What is Comfort Cool technology in Laserlite 3000 polycarbonate roofing?
Comfort Cool is an exclusive Laserlite 3000 technology that reflects heat-producing infrared rays while still allowing natural light through. It provides up to 50% better heat reduction than standard polycarbonate and is not available in Laserlite 2000.
-
What is the difference between Laserlite and Ampelite Solasafe polycarbonate roofing?
Both products are Australian-made, block 99.9% of UV rays and include 10-year hail warranties. Laserlite 3000 offers up to 50% better heat reduction and a Lifetime Platinum Warranty, while Ampelite Solasafe Level 3 reflects up to 80% of solar heat and includes a lifetime discolouration warranty.
-
Is Laserlite polycarbonate roofing noisy when it rains in Melbourne?
Laserlite roofing produces rain noise similar to corrugated Colorbond, but it is generally acceptable for patios and pergolas. Noise can be reduced with foam infill strips, acoustic sarking or a Laserlite 2000 Trimdeck profile, while hail up to 25mm is covered by the 10-year warranty.
-
Can Laserlite polycarbonate roofing be installed over an existing roof?
Laserlite can be installed on an existing roof framework if the purlins are structurally sound, correctly spaced and the roof has a minimum 5-degree pitch. The old roofing sheets should be removed first, and older frameworks may require purlin adjustments before installation.
-
Should I use Laserlite 2000 or Laserlite 3000 for my Melbourne patio?
Choose Laserlite 3000 for north- or west-facing Melbourne patios that receive strong afternoon sun, as Comfort Cool technology provides up to 50% better heat reduction. Laserlite 2000 is better for shaded or south/east-facing patios, budget-conscious projects, or when a Trimdeck profile is required.